R502

R502

Rig
MakeCharden Drills
ModelCH 2000
CarrierFreightliner FL112
Rig EngineCummins M11 - 350 H.P.
Drilling OperationsSolid Stem Auger, Hollow Stem Auger, NQ / HQ Coring, Laskey Coring ODEX, Standard Penetration Testing, Shear Vein Testing, Mud Rotary Drilling
Move Loads
Summer2 Loads
Capabilities
Depth50.00m (Standard Auger) - 150.00m (Coring)
Hole Size95.25mm to 273.00mm : 3 3/4" to 10 3/4"
Mast
MakeCharden
ModelCH2000
RangeRange I Compatible - Top Drive Travel - 6.85 meters (25' 6")
Dimensions8.07m (L) x 0.60m (W) x 0.60m (D) : (20' (L) x 24" (W) x 24" (D)
Static Hook Load20,000 DaN (45,000 lbs)
Pull Back10,800 DaN (24,000 lbs)
Pull Down9,000 DaN (20,400 lbs)
Hydraulic Draw Works
MainlinePull Master PL - 4 (30430)
Capacity - Line Pull1,500 DaN (3,550 lbs) - Single Line
Line Speed41.95 m/min
Line Size1/2" (6 x 19 IWRC EIPS)
Wireline - Core RetrievalPull Master PL - 2 (27004)
Capacity - Core Retrieval800 DaN (1,829 lbs)
Line Speed52.50 m/min
Line Size1/2" (6 x 19 IWRC EIPS)
Top Drive
MakeCharden
ModelCH2000
Capacity20,000 DaN (45,000 lbs)
Torque Output15,591 N-m : 11,500 ft lbs (rated at 100 R.P.M.)
R.P.M.0 – 100 R.P.M.
SwivelPinnacle Drilling Products - Side Swivel
Swivel Capacity20,000 DaN (45,000 lbs)
Generator
MakeMQ – Whisperwatt
EngineIsuzu
Output20 KvW : 208 Volt - 3 Phase
Mud Pump
MakeMoyno
Model3L8
Output0.40 m3/min
Max Operating Pressure1,550 kPa
DriveHydrostatic
Carrier Specifications
Length9.75 m (32')
Width2.59 m (8' 6")
Height3.50 m (11' 6")
Minimum Ground Clearance0.50 m (20")
Track WidthSingle Steer - Tandem Rear
Machine Weight12,475 kg (27,500 lbs)
Machine Weight Loaded13,107 kg (30,000 lbs)
Travel Speed (Maximum)120 km/hr - 74.5 M.P.H.
Ground Pressure Loaded74.90 kPa (10.7 P.S.I.)
Fuel Tanks
Capacity700L - On Board Storage
Rig Summary
MakeCharden CH200 – Truck Mount
Drilling OpsSolid Stem / Hollow Stem Auger / HQ Coring / Laskey Coring
CapabilitiesDepths up to 30 m